A1
| Exploded view - wheel bearing |
| 1 - | Axle beam |
| q | Removing and installing → Chapter |
| 2 - | Bolt |
| q | Tightening torque → Rep. gr.46 |
| 3 - | Splash plate for brakes |
| 4 - | Brake caliper |
| 5 - | Stub axle |
| q | Must not be straightened |
| q | Recutting the thread is not permitted |
| 6 - | Bolt |
| q | 30 Nm +90° |
| q | Always renew if removed |
| 7 - | Wheel hub with wheel bearing |
| q | Removing and installing → Chapter |
| q | The wheel bearing and wheel hub are combined in one housing |
| q | The wheel hub with wheel bearing unit is maintenance and adjustment-free. There is no provision for adjustment or repair. |
| 8 - | Twelve-point nut |
| q | 80 Nm +30° |
| q | Always renew if removed |
| 9 - | Grease cap |
| q | Always renew if removed |
| q | Proper sealing can only be achieved by installing a new grease cap. |
| q | This is essential for optimum function and service life of wheel bearing. |
| 10 - | Brake disc |
| 11 - | Bolt |
| q | Tightening torque → Rep. gr.46 |
