| –
| Open service flap in wheel housing liner (left-side). |
| –
| Check hydraulic fluid level and top up if necessary → Chapter. |
| –
| Start engine and run at idle for about 5 seconds. |
| –
| Switch off engine and check hydraulic fluid level. |
| –
| Repeat this procedure once. |
| –
| Start engine again and with engine idling, turn steering wheel from lock to lock three times. |
| –
| Switch engine off and check hydraulic fluid level; top up if necessary. |
| –
| Repeat this procedure twice. |
| l
| Leave engine switched off for 2 to 3 minutes to allow air bubbles to escape from hydraulic fluid. |
| –
| Turn steering wheel 5 times from lock to lock. |
| The system is bled when no more air bubbles rise in the hydraulic fluid reservoir. |
| –
| Switch off engine and check hydraulic fluid level. |
|
|
|
