audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Removing and installing headlight range control motor V48/V49 > < Renewing front turn signal bulb M5/M7

A1

Removing and installing left/right gas discharge bulb control unit J343/J344
Removing and installing left/right gas discharge bulb control unit -J343-/-J344-
  WARNING
High voltage! Danger to life!
Always disconnect the battery earth cable before working on parts of the gas discharge headlights marked with yellow high-voltage warning symbols.
   
Removing
–  Remove headlight housing → Chapter.
–  Remove bolts -arrows-.
–  Detach control unit -1- from headlight housing.
–  Disconnect adapter cable -2- and electrical connector -4-.
–  Detach control unit.
Installing
l  Tightening torque → Chapter
Installation is carried out in the reverse order; note the following:
–  Check seal -3- between control unit and headlight housing for damage.
–  Install headlight housing → Chapter.
  A94-10973

Removing and installing headlight range control motor V48/V49 > < Renewing front turn signal bulb M5/M7