audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Renewing headlight main beam bulb M30/M32 > < Removing and installing headlight housing

A1

Renewing headlight dipped beam bulb M29/M31
Renewing headlight dipped beam bulb -M29-/-M31-
   
Removing
–  Remove headlight housing → Chapter.
–  Release retaining tab -2- and disengage housing cover -1--arrow-.
  A94-10941
–  Remove bulb -1- from spring clips -arrows-.
–  Unplug electrical connector -2- at bulb.
Installing
Installation is carried out in the reverse order; note the following:
–  Plug electrical connector in again and push new bulb beyond resistance of spring clips into housing; do not touch glass part of bulb with bare hands.
–  Close housing cover.
–  Install headlight housing → Chapter.
  A94-10942

Renewing headlight main beam bulb M30/M32 > < Removing and installing headlight housing