audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Tail lights in body > < Removing and installing rear turn signal bulb M6/M8

A1

Removing and installing reversing light bulb M16/M17
Removing and installing reversing light bulb -M16-/-M17-
   
Removing
–  Remove tail light cluster → Chapter.
–  Turn bulb holder -2- anti-clockwise -arrow- and pull it out of tail light housing.
–  Pull reversing light bulb -1- out of bulb holder.
Installing
Installation is carried out in the reverse order; note the following:
–  Insert new bulb in bulb holder, taking care not to touch glass part of bulb with bare hands.
–  Install tail light cluster → Chapter.
  A94-10955

Tail lights in body > < Removing and installing rear turn signal bulb M6/M8