A1
| Exploded view of bracket and mounting for headlight housing |
| 1 - | Bolt |
| q | Tightening torque → Rep. gr.50 |
| 2 - | Breather hose |
| q | For headlight housing |
| 3 - | Bolt |
| q | 4.5 Nm |
| 4 - | Locking bolt |
| q | For securing headlight housing in bracket |
| 5 - | Lock carrier |
| 6 - | Bolt |
| q | 4.5 Nm |
| 7 - | Locking bolt |
| q | For securing headlight housing in bracket |
| 8 - | Bracket |
| q | For headlight housing |
| q | With adjuster element for adjusting headlight housing according to bumper contour |
| q | Removing and installing → Chapter |
| 9 - | Bracket |
| q | For headlight housing |
| q | With adjuster element for adjusting headlight housing according to bumper contour |
| q | Removing and installing → Chapter |
| 10 - | Mounting |
| q | For breather hose for headlight housing |
| 11 - | Bolt |
| q | 4.5 Nm |
| 12 - | Speed nut |
| 13 - | Mounting |
| q | For headlight housing |
| 14 - | Bolt |
| q | Tightening torque → Rep. gr.50 |
| 15 - | Bolt |
| q | Tightening torque → Rep. gr.50 |
