audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Removing and installing steering column switch module > < Steering column switch module and electronic ignition lock
Exploded view of steering column switch module, electronic ignition lock
   
Exploded view of steering column switch module, electronic ignition lock
1 - Steering column
2 - Bolt
q   2x
q   For steering lock housing (shear bolt)
3 - Immobilizer reader coil -D2-
q   Removing and installing → Chapter
4 - Ignition lock
5 - Entry and start authorisation button -E408-
q   Exploded view → Chapter
6 - Bolt
q   3x
q   1.1 Nm
7 - Steering column electronics control unit -J527-
q   With airbag coil connector and return ring with slip ring -F138-, steering angle sender -G85-
q   Removing and installing → Chapter
  Caution
Risk of damage to return ring.
Return ring with slip ring must not be turned following removal.
q   Pin assignment for steering column electronics control unit -J527- → Chapter
8 - Transport protection
9 - Mounting
q   With turn signal switch -E2-, intermittent wiper switch -E22-
q   Versions equipped with cruise control system: with cruise control system switch -E45-
q   Removing and installing → Chapter
10 - Electronic steering column lock control unit -J764-
q   Removing and installing → Chapter

   

Removing and installing steering column switch module > < Steering column switch module and electronic ignition lock