A1
| Exploded view of tail light cluster |
| 1 - | Tail light |
| q | In rear lid |
| q | Removing and installing → Chapter |
| 2 - | Seal |
| q | Self-adhesive |
| q | Renew if damaged |
| q | Is bonded to rear lid |
| 3 - | Reversing light bulb |
| q | Left reversing light bulb -M16- |
| q | Right reversing light bulb -M17- |
| q | 12 V, 16 W (W16W) |
| q | Renewing bulbs → Chapter „Removing and installing bulb holder“ |
| 4 - | Rear turn signal bulb |
| q | Rear left turn signal bulb -M6- |
| q | Rear right turn signal bulb -M8- |
| q | 12 V, 18 W |
| q | W16W |
| q | Renewing bulbs → Chapter „Removing and installing bulb holder“ |
| 5 - | Brake and tail light bulb |
| q | Left brake and tail light bulb -M21- |
| q | Right brake and tail light bulb -M22- |
| q | 12 V, 21 W |
| q | Renewing bulbs → Chapter „Removing and installing bulb holder“ |
| 6 - | Nut |
| q | Tightening torque and tightening sequence → Fig. |
| 7 - | Grommet |
| 8 - | Nut |
| q | Tightening torque and tightening sequence → Fig. |
| 9 - | Grommet |
| 10 - | Bulb holder |
| q | Removing and installing → Chapter |
| 11 - | Nut |
| q | Tightening torque and tightening sequence → Fig. |
| 12 - | Nut |
| q | Tightening torque and tightening sequence → Fig. |
| 13 - | Retainer bracket |
| q | Secures tail light cluster to rear lid |
| 14 - | Tail light and rear fog light bulb |
| q | Left tail light and rear fog light bulb -M41- |
| q | Right tail light and rear fog light bulb -M42- |
| q | 12 V, 21 W |
| q | Renewing bulbs → Chapter „Removing and installing bulb holder“ |
| 15 - | Brake and tail light 2 bulb |
| q | Left brake and tail light 2 bulb -M58- |
| q | Right brake and tail light 2 bulb -M59- |
| q | 12 V, 21 W |
| q | Renewing bulbs → Chapter „Removing and installing bulb holder“ |
|
|
