audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Tail light cluster in rear lid > < Exploded view of exterior mirror turn signal

A1

Removing and installing exterior mirror turn signal bulb L131/L132
Removing and installing exterior mirror turn signal bulb -L131-/-L132-
   
Removing
–  Remove rear section of exterior mirror housing → Rep. gr.66.
–  Unplug electrical connector -2-.
–  Remove bolts -arrow-.
  Note
Make sure that the bolts for the turn signal bulb do not fall into the door shell through the mirror base.
–  Lift turn signal bulb -3- out of mounting -1- for mirror adjustment unit.
  A94-10948
Installing
l  Tightening torques → Chapter
Installation is carried out in the reverse order; note the following:
  Note
Entire turn signal in exterior mirror must be renewed as a complete unit if an LED is defective.
–  Fit turn signal bulb -1- in mounting -3- for mirror adjustment unit and make sure guide -2- for bulb engages in groove -arrow-.
  Note
Make sure that the bolts for the turn signal bulb do not fall into the door shell through the mirror base.
–  Install rear section of exterior mirror housing → Rep. gr.66.
  A94-10950

Tail light cluster in rear lid > < Exploded view of exterior mirror turn signal