| Moving windscreen wipers to service position |
Note | The bonnet must be completely closed if the wiper motor needs to be run during repair work (the voltage supply to the wiper motor is cut off when the bonnet is open). |
| –
| At sub-zero temperatures, first check that the wiper blades are not frozen onto the glass. |
| –
| Briefly switch ignition on and off again. |
| –
| Operate „touch wipe“ function within 10 seconds. |
| l
| The wipers will run to the „service position“. |
Caution | The bonnet can be damaged if the wipers are allowed to run back to the park position. |
| t
| Do not move the vehicle when the wiper arms are lifted up off the windscreen. |
| t
| The wipers automatically run back to the park position when the wiper switch is operated or when road speed exceeds 6 km/h. |
|
|
|
|
