l
| Total length of aerial connection = length of required adapter wires -1 and 3- plus connecting wire -2-. |
–
| Subtract 60 cm from total length of aerial connection measured to calculate required length of connecting wire needed. |
–
| Cut connectors off defective aerial wire. |
l
| Leave rest of defective aerial wire in vehicle. |
–
| Connect adapter wires to units in vehicle. |
–
| Fit connectors with a piece of foam sheathing to prevent rattling noise. |
–
| Lay and secure connecting wire parallel to old aerial wire. |
Note Aerial wires must not be kinked or bent excessively. Bending radius must not be less than 50 mm. |
–
| Attach connecting wire to adapter wires. |
–
| To prevent rattling noises, apply a suitable piece of foam sheathing to aerial connectors. |
|
|
|