A1
|
|
|
Note
The trim element cannot be removed without being damaged irreparably. |
– | Release lock washers -2- on inside of light alloy wheel. |
– | Heat trim element -1- from outside with hot air blower -V.A.G 1416-. |
Caution
|
– | Release trim element -1- from inside of light alloy wheel using removal wedge -3409-. |
– | Reach under one of the corners from outside and pull trim element -1- firmly off light alloy wheel. |
Note
t | Remove the spots of PUR adhesive from the light alloy wheel by cutting them off. |
t | Remaining material can be used as an adhesive base for the new trim element. |
t | The new trim element can be fitted immediately → Chapter. |