WARNING After using tyre sealant, the wheel electronics on the affected wheel must be renewed. |
|
l
| Make sure to clean the wheel beforehand. |
–
| The wheel electronics must be renewed if tyre sealant has been applied, as liquid deposits on the pressure sensor could lead to incorrect displays. |
–
| Unscrew the valve core. |
–
| Inflate the tyre to approx. 3 to 4 bar; you should hear the bead of the tyre slip over the rim hump. |
–
| Screw in the valve core. |
–
| Adjust the tyre pressure in line with the specifications. |
|
|
|