audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Matching of radio-operated remote control keys > < Final control diagnosis
Body Self-diagnosis
Self-diagnosis for convenience system
Reading measured value block

Performing function "Read measured value block"

 
→ Indicated on display:
Rapid data transfer     HELP
Select function XX
  • ‒ Press keys -0- and -8- (08 selects function "Read measured value block").
 
→ Indicated on display:
Rapid data transfer     Q
08 - Read measured value block
  • ‒ Confirm entry with Q key.
 
→ Indicated on display:
Read measured value block    HELP
Enter display group number XXX
  • ‒ Enter display group number (see table ) and confirm entry with Q key.

The measured value block which has been selected will appear in standard format.

Summary of display groups:

Display group no.

Indicated on display

001

1 = Key switch, driver's side
2 = CL interior switch
3 = Feedback signal, driver's side lock
4 = Feedback signal, driver's side lock

002

1 = Key switch, driver's side
2 = Key switch, passenger's side
3 = Feedback signal, passenger's side lock
4 = Feedback signal, passenger's side lock

003

1 = Feedback signal, rear right lock
2 = Feedback signal, rear right lock
3 = Feedback signal, rear left lock
4 = Feedback signal, rear left lock

004

1 = Door contact switch, driver's side
2 = Door contact switch, passenger's side
3 = Door contact switch, rear right
4 = Door contact switch, rear left

Display group no.

Indicated on display

005

1 = Switch for tank flap unlocking
2 = Contact switch, tailgate
3 = Soft touch function for tailgate release
4 = Bonnet contact switch

006

1 = Interior light
2 = Release for window lifters
3 = Automatic opening/closing
4 = Luggage compartment light

007

1 = Key from matched position
2 = Remote command
3 = Matched keys in position
4 = Vacant measured value block

008

1 = Road speed signal
2 = Immobiliser key recognised
3 = Rear window heating
4 = Vacant measured value block

Display group no.

Indicated on display

009

1 = Code
2 = Code
3 = Code
4 = Code

010

1 = Door contact switch, driver's side
2 = Switch for interior monitoring
3 = Handbrake
4 = Reversing light

011

1 = Window lifter switch, driver's side
2 = Window lifter thermal protection, driver's side
3 = Childproof lock switch
4 = Vacant measured value block

012

1 = Window lifter switch, driver's side for passenger's side
2 = Window lifter switch, driver's side for rear right
3 = Window lifter switch, driver's side for rear left
4 = Vacant measured value block

Display group no.

Indicated on display

013

1 = Mirror adjustment switch
2 = Mirror selection switch
3 = Mirror release switch
4 = Mirror heater

014

1 = Window lifter switch, passenger's side
2 = Window lifter thermal protection, passenger's side
3 = Vacant measured value block
4 = Vacant measured value block

015

1 = Window lifter switch, rear right
2 = Window lifter thermal protection, rear right
3 = Window lifter switch, rear left
4 = Window lifter thermal protection, rear left

016

1 = Vehicle voltage, terminal 30
2 = Ignition
3 = S contact
4 = Bus status

017

1 = Door control unit, driver's side
2 = Door control unit, passenger's side
3 = Door control unit, rear left
4 = Door control unit, rear right

Measured value block 001

Read measured value block

◂ Indicated on display

Not actuated

Not actuated

Unlocked

Not deadlocked

Feedback signal, lock, driver's side
▪ Deadlocked
▪ Not deadlocked

Feedback signal, lock, driver's side
▪ Locked
▪ Unlocked

CL interior switch
▪ Lock
▪ Unlock
▪ Not actuated

Key switch, driver's side
▪ Open
▪ Closed
▪ Not actuated

Measured value block 002

Read measured value block

◂ Indicated on display

Not actuated

Not actuated

Unlocked

Not deadlocked

Feedback signal, lock, passenger's side
▪ Deadlocked
▪ Not deadlocked

Feedback signal, lock, passenger's side
▪ Locked
▪ Unlocked

Key switch, passenger's side
▪ Open
▪ Closed
▪ Not actuated

Key switch, driver's side
▪ Open
▪ Closed
▪ Not actuated

Measured value block 003

Read measured value block

◂ Indicated on display

Unlocked

Not deadlocked

Unlocked

Not deadlocked

Feedback signal, lock, rear left
▪ Deadlocked
▪ Not deadlocked

Feedback signal, lock, rear left
▪ Locked
▪ Unlocked

Feedback signal, lock, rear right
▪ Deadlocked
▪ Not deadlocked

Feedback signal, lock, rear right
▪ Locked
▪ Unlocked

Measured value block 004

Read measured value block

◂ Indicated on display

Door open

Door open

Door closed

Door closed

Door contact switch, rear left
▪ Door open
▪ Door closed

Door contact switch, rear right
▪ Door open
▪ Door closed

Door contact switch, passenger's side
▪ Door open
▪ Door closed

Door contact switch, driver's side
▪ Door open
▪ Door closed

Measured value block 005

Read measured value block

◂ Indicated on display

Not actuated

Lid closed

Not actuated

Not installed

Bonnet contact switch1)
▪ Lid open
▪ Lid closed
▪ Not installed

Soft touch for tailgate release
▪ Actuated
▪ Not actuated

Contact switch for tailgate
▪ Tailgate open
▪ Tailgate closed

Switch for tank flap unlocking
▪ Actuated
▪ Not actuated

1)    Only for vehicles equipped with anti-theft alarm.

Measured value block 006

Read measured value block

◂ Indicated on display

On

Relay ON

Not actuated

Off

Luggage compartment light
▪ On
▪ Off

Automatic open/close function1)
▪ Open
▪ Closed
▪ Not actuated

Release for window lifters2)
▪ Relay ON
▪ Relay OFF

Interior light
▪ On
▪ Off

1)    The sun roof is not actuated via the automatic open function.

2)    Relay ON: Logic relay is activated by terminal 15 and supplies power to sun roof and window lifter logic. Simultaneously, the release signal is sent to the door electronics via the Group convenience data bus.

Measured value block 007

Read measured value block

◂ Indicated on display

0

0

1 1 0 0

Vacant measured value block

Matched keys in position (1st/ 2nd/ 3rd/ 4th memory position)
▪ 0: Not occupied
▪ 1: Occupied

Remote control command
▪ 0: No remote control command
▪ 1: Unlock
▪ 2: Lock
▪ 3: Tailgate

Key from matched position
▪ 0: No key was matched
▪ 1,2,3,4: The number indicates the memory location for the matched key

Measured value block 008

Read measured value block

◂ Indicated on display

0 km/h

Yes

Off

Vacant measured value block

Rear window heating1)
▪ On
▪ Off

Immobiliser key recognised
▪ Yes
▪ No2)
▪ No communication3)

Speed signal4)
▪ Value
▪ No communication3)
▪ No measured value

1)    If "Off" is displayed despite the rear window heating being switched on, adaption for "Air conditioner not fitted" has been performed although an air conditioner has been installed. Check adaption channel 60, Adjusting a fitted operating and display unit for air conditioner -E87 => Page 01-77.

2)    Key was not correctly adapted to the dash panel insert and therefore not to the immobiliser.

=> Electrical System; Repair group 01; Immobiliser Self-diagnosis - Immobiliser III

3)    No communication from dash panel insert to central control unit for convenience system; check data exchange => Page 01-84.

4)    Current value is only displayed when terminal 15 is on.

Measured value block 009

Read measured value block

◂ Indicated on display

0 0 1 1

0 0 1 0

0 0 0 0

0 0

Coding
▪ 01: Rear locking via speed
▪ 10: Right-hand drive

Coding
▪ 0001: Deactivate anti-theft alarm with deliberate deadlock release1)
▪ 0010: Confirmation of anti-theft alarm via flashing1)
▪ 0100: SCL active
▪ 1000: Anti-theft alarm active1)

Coding
▪ 0001: Central locking via speed
▪ 0010: Convenience function via remote control2)
▪ 0100: Confirmation of anti-theft alarm via horn1) 3)
▪ 1000: Terminal 87 Door logic

Coding
▪ 0001: Confirmation of remote control locking via flashing
▪ 0010: Confirmation of remote control unlocking via flashing
▪ 0100: No deadlock function
▪ 1000: Remote control CL function with SCL selected3)

1)    Only for vehicles equipped with anti-theft alarm.

2)    All the available convenience functions can also be performed via remote control.

3)    No longer permissible under German law.

Measured value block 010

Read measured value block

◂ Indicated on display

Door open

Not installed

Not actuated

Not actuated

Reversing light
▪ On
▪ Off

Handbrake
▪ Actuated
▪ Not actuated

Switch for interior monitoring1)
▪ Actuated
▪ Not actuated
▪ Not installed

Door contact switch, driver's side
▪ Door open
▪ Door closed

1)    Only for vehicles equipped with anti-theft alarm.

Measured value block 011

Read measured value block

◂ Indicated on display

Not actuated

No

On

Vacant measured value block

Child safety lock switch
▪ Off
▪ On

Window lifter thermal protection, driver's side
▪ Yes
▪ No
▪ Not installed

Window lifter switch, driver's side
▪ Automat. open
▪ Automat. close
▪ Man. open
▪ Man. close
▪ Not actuated

Measured value block 012

Read measured value block

◂ Indicated on display

Not actuated

Not actuated

Not actuated

Vacant measured value block

Window lifter switch, driver's side for rear left
▪ Automat. open
▪ Automat. close
▪ Man. open
▪ Man. close
▪ Not actuated
▪ Not installed

Window lifter switch, driver's side for rear right
▪ Automat. open
▪ Automat. close
▪ Man. open
▪ Man. close
▪ Not actuated
▪ Not installed

Window lifter switch, driver's side for passenger's side
▪ Automat. open
▪ Automat. close
▪ Man. open
▪ Man. close
▪ Not actuated

Measured value block 013

Read measured value block

◂ Indicated on display

Not actuated

Right

Not installed

Off

Mirror heater1)
▪ On
▪ Off

Mirror release switch
▪ Released
▪ Engaged
▪ Not installed

Mirror selection switch
▪ Left
▪ Right
▪ Fold down
▪ Not actuated

Mirror adjustment switch
▪ Pos X +
▪ Pos X -
▪ Pos Y +
▪ Pos Y -
▪ Not actuated

1)    If, nevertheless, "Off" is displayed after switching on the mirror heater via the rear window heating, adaption for "Air conditioner not fitted" has been performed although air conditioning has been installed. Check adaption channel 60, Adjusting a fitted operating and display unit for air conditioner -E87 => Page 01-77.

Measured value block 014

Read measured value block

◂ Indicated on display

Not actuated

No

Vacant measured value block

Vacant measured value block

Window lifter thermal protection, passenger's side
▪ Yes
▪ No
▪ Not installed

Window lifter switch, passenger's side
▪ Automat. open
▪ Automat. close
▪ Man. open
▪ Man. close
▪ Not actuated

Measured value block 015

Read measured value block

◂ Indicated on display

Not actuated

No

Not actuated

No

Window lifter thermal protection, rear left
▪ Yes
▪ No
▪ Not installed

Window lifter switch, rear left
▪ Automat. open
▪ Automat. close
▪ Man. open
▪ Man. close
▪ Not actuated
▪ Not installed

Window lifter thermal protection, rear right
▪ Yes
▪ No
▪ Not installed

Window lifter switch, rear right
▪ Automat. open
▪ Automat. close
▪ Man. open
▪ Man. close
▪ Not actuated
▪ Not installed

Measured value block 016

Read measured value block

◂ Indicated on display

12.2 V

Terminal 15 ON

Actuated

Two-wire

Bus condition
▪ Single wire
▪ Two-wire

S contact
▪ Actuated
▪ Not actuated
▪ No communication1)

Ignition
▪ Terminal 15 ON
▪ Terminal 15 OFF
▪ No communication1)

Vehicle voltage terminal 30
▪ Voltage

1)    No communication from dash panel insert to central control unit for convenience system; check data exchange => Page 01-84.

Measured value block 017

Read measured value block

◂ Indicated on display

Driver's door 1

Passenger's door 1

Door, RL 1

Door, RR 1

Door control unit, rear right
▪ Door, RR 11)
▪ Door, RR 02)
▪ Not installed3)

Door control unit, rear left
▪ Door, RL 11)
▪ Door, RL 02)
▪ Not installed3)

Door control unit, passenger side
▪ Passenger's door 11)
▪ Passenger's door 02)

Door control unit driver's side
▪ Driver's door 11)
▪ Driver's door 02)

1)    Detected or communication to central control unit available.

2)    Not detected or no communication to central control unit.

3)    For part numbers 8Z0 959 433 C/ D/ F/ H.

Matching of radio-operated remote control keys > < Final control diagnosis