audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
End of output > < Adaption

A2

Body Self-diagnosis
Ultrasonic interior monitoring self-diagnosis
Erasing fault memory

Note:

The vehicle system tester V.A.G 1552 can be used instead of the fault reader V.A.G 1551, however a printout is not possible.

  • ‒ Connect the fault reader .

Preconditions:

  • ◆ Fault was remedied
  • ◆ Functional test was performed
  • ◆ Fault memory was interrogated again
 
→ Indicated on display:
Rapid data transfer     HELP
Select function XX
  • ‒ Press keys -0- and -5- (use 05 to enter function "Erase fault memory").
 
→ Indicated on display:
Rapid data transfer     Q
05 Erase fault memory
  • ‒ Confirm entry with Q key.
 
→ Indicated on display:
Rapid data transfer    ⇒
Fault memory has been deleted
  • ‒ Press ⇒ key.
 
→ Indicated on display:
Rapid data transfer     HELP
Select function XX

Notes:
 
→ This display indicates a fault in the test sequence.
Warning        
Fault memory not interrogated
  • ◆ Observe test sequence exactly: First interrogate fault memory then erase it.
    • ‒ Press keys -0- and -6- to end output.
     
    → Indicated on display:
    Rapid data transfer     Q
    06 End output
    • ‒ Confirm entry with Q key.
     
    → Indicated on display:
    Rapid data transfer     HELP
    Enter address word XX
    • ‒ Switch off ignition.
    • ‒ Disconnect connectors for fault reader V.A.G 1551.

    End of output > < Adaption