Audi Workshop Service and Repair Manuals

Notes:

• ◆ The final control diagnosis may only be performed with the vehicle stationary and the engine not running.
• ◆ Any faults identified by the final control diagnosis must be traced and rectified.

The final control diagnosis activates the following elements in sequence:

• ◆ Triggering of anti-theft alarm.

Notes:

• ◆ An "anti-theft alarm" cannot be triggered through this final control diagnosis. In order to trigger an anti-theft alarm, please perform final control diagnosis from the convenience system for central control unit =>Paste01-40.
• ◆ During final control diagnosis "Triggering of an anti-theft alarm", the bi-directional communication line between the transmit/receive module for interior monitoring is switched to earth, and can consequently be used for measuring purposed.