A2
| Removing and installing wheel housing liner (front) |
Note| Depending on the equipment fitted, the wheel housing liners differ slightly regarding the position and number of fasteners. |
| 1 - | Wheel housing liner (front) |
| q | Before removing, detach front wheel. |
| q | Unscrew bolts → Item |
| q | Press out pins of spreader rivets, pull spreader rivets out and take wheel housing liner out of opening. |
| 2 - | Spreader rivet |
| 3 - | Self-tapping screw |
| q | 1.5 Nm |
| 4 - | Noise insulation |
