Removing and installing door seal (outer) |
–
| To remove, unclip bottom section from door and detach top section from the door subframe. |
–
| When installing, first fit rubber corner -arrow a- at joint between door and door subframe, inserting retaining lug in door cut-out. |
–
| Attach seal to top of door subframe in direction of -arrow b-. |
–
| Fix rubber corner -arrow c- in position at joint between door and door subframe. |
–
| Then fit clips all around the door, starting at the top and working towards the bottom. |
–
| Finally, pull protective film off adhesive surface and press seal firmly onto door in area of door lock. |
|
|
|