A2
Removing lock cylinder and door handle |
1 - | Lock cylinder |
q | Removing: |
– | Pull door handle outwards and hold it in this position. |
– | Use socket wrench -T10072- to turn screw -arrow C- as far as stop in anti-clockwise direction. |
– | Once the screw has been unscrewed the door handle will be locked in the outward position → Fig.. |
– | Use key to pull lock cylinder out of door handle mounting. |
2 - | Door handle mounting |
q | Removing → Item. |
3 - | Door handle |
q | Before removing, detach lock cylinder. |
q | Pull door handle towards the rear and remove towards the outside. |
q | When installing, ensure that seal on door handle is inserted behind door panel. |
q | The retaining tab must engage above the catch mechanism → Anchor. |
|