A2
Removing and installing side window (rear) - exploded view |
Note
It is not possible to remove this window without destroying it. |
1 - | Side window (rear) |
q | Removing → Chapter. |
q | Installing → Chapter. |
q | Before removing, insert protective foil - Audi A2 side window -V.A.G 1474/16- between trim parts and window flange (from inside), in order to protect trim parts. |
2 - | Adhesive bead |
q | Note differing distances between adhesive bead and edge of window. |
q | Dimension -a- at front edge of window = 15 mm ± 2 mm |
q | Dimension -b- at bottom, rear and top edge of window = 9 mm ± 2 mm |
3 - | Trim surrounding window |
q | Before removing window, cut off bottom section of trim surrounding window using a blade. |
4 - | Stop for C-pillar |
q | When installing, push window towards the rear, so that stop makes contact with C-pillar. |
5 - | Adhesive tape |
q | Mask window opening with fabric-backed adhesive tape to prevent damage to paintwork. |