A2
| Removing and installing rear centre console |
| 1 - | Rear centre console |
| q | Removing |
| q | Manual gearbox: |
| q | Unclip boot → Chapter, Item no. 3. |
| q | Direct shift gearbox: |
| q | Unclip cover for direct shift gearbox → Chapter, Item no. 2. |
| q | Additional rear storage compartment: |
| q | Remove additional rear storage compartment → Chapter. |
| q | All models: |
| q | Remove rear storage compartment → Chapter, Item no. 5. |
| q | Remove handbrake lever console → Chapter, Item no. 4. |
| q | Remove left and right centre console side trim → Chapter. |
| q | Remove centre console insert → Chapter, Item no. 1. |
| q | Remove left and right knee guides → Chapter. |
| q | Unscrew bolts -2- (8x). |
| q | Move gear lever/selector lever to front position. |
| q | Fully apply handbrake. |
| q | Lift back of rear centre console -1- and pull front fully forwards. |
| q | Take out rear centre console -1- (unscrew bolts -3- at handbrake lever if necessary). |
| q | Manual gearbox: Slide out boot downwards through openings -4-. |
| 2 - | Bolts (8x) |
| q | Tightening torque 4 Nm |
| 3 - | Bolts (2x) |
| 4 - | Openings |