A2
Removing and installing three-point seat belt with belt height adjuster and belt tensioner |
1 - | Belt tensioner |
t | Removing three-point seat belt |
– | Disconnect battery. |
– | Remove lower B-pillar trim -12- → Chapter. |
– | Unscrew bolts -11- (2x). |
– | Detach guide bracket -10-. |
– | Unclip cap -9- at bottom and lift it off. |
– | Unscrew bolt -8-. |
– | Detach cap -14-. |
– | Unscrew bolt -13-. |
– | Carefully unplug connector -3- → Fig. |
– | Unscrew bolt -2-. |
– | Lift out belt tensioner -1- with locating pin -15-. |
t | Installing three-point seat belt |
– | Engage belt tensioner -1- as shown in detail view with locating pin -15-. |
– | As shown, fit webbing turned through 180° -arrow-. |
– | -Arrow A- points in direction of travel. |
– | Perform remaining installation operations in reverse order of removal. |
t | After fitting passenger's side three-point seat belt, check belt function for child seat → Chapter. Three-point seat belt must not be impeded by cables, wires, sound absorbers or the like. |
2 - | Bolt |
q | Tightening torque 55 Nm |
3 - | Belt tensioner connector |
4 - | Belt height adjuster |
t | Removing belt height adjuster |
– | Unclip cap -9- at bottom and lift it off. |
– | Unscrew bolt -8-. |
– | Remove upper B-pillar trim -6- → Chapter. |
– | Unscrew bolt -5- (1x). |
– | Lift out belt height adjuster -4-. |
t | Installing belt height adjuster |
Note
t | Checking operation after installing trim: |
t | Height adjuster must be heard to engage in each of the 5 possible positions (including top position). |
t | Following actuation, button must always return automatically to top position. |
5 - | Bolt |
q | Tightening torque 24 Nm |
6 - | Upper B-pillar trim |
7 - | Guide fitting |
q | Guide fitting must settle automatically in usage direction after tightening bolt -8-. |
8 - | Bolt |
q | Tightening torque 55 Nm |
9 - | Cap |
q | Unclip cap -9- at bottom and lift off. |
10 - | Guide bracket |
11 - | Bolts (2x) |
q | Tightening torque 5 Nm |
12 - | Lower B-pillar trim |
13 - | Bolt |
q | Tightening torque 55 Nm |
14 - | Cap |
15 - | Locating pin |