A2
| Removing and installing front door trim |
| 1 - | Door trim |
| t | Removing |
| – | Use flat screwdriver to prise out treble loudspeaker trim -2-. |
| – | Unscrew bolt -3-. |
| – | Screw bolts -4- (2x) out of door trim -1-. |
| – | Unfasten door trim -1- at clips -7- (8x) from door shell. |
| – | Lift door trim -1- out of retaining element -6-. |
| – | Disengage Bowden cable for interior door handle → Fig. |
| – | Unplug connector to treble loudspeaker → Fig. |
| – | Unplug connector at window lifter control unit → Fig. |
| t | Installing |
| – | Replace damaged clips -7- → Fig. |
| – | Attach wiring harnesses. |
| – | Engage Bowden cable. |
| – | Engage door trim -1- at retaining element -6-. |
| – | Clip on door trim -1-. |
| – | Screw on door trim -1-. |
| 2 - | Treble loudspeaker trim |
| 3 - | Bolt |
| q | Tightening torque 2 Nm |
| 4 - | Bolts (2x) |
| q | Tightening torque 2 Nm |
| 5 - | Door shell |
| 6 - | Retaining element |
| 7 - | Clips (8x) |
Note
|
|
|
|
|
|
|
|
