A2
| Removing and installing upper B-pillar trim |
| 1 - | Upper B-pillar trim |
Note| Bolt -2- is only fitted on vehicles with head airbag. |
| q | Remove B-pillar trim. → Rep. Gr.66 |
| q | Remove upper grommet. |
| q | Unscrew bolt -2-. |
| q | Unscrew upper seat belt anchorage point → Chapter, Item no. 8. |
| q | Remove lower B-pillar trim → Chapter. |
| q | Pull trim -1- downwards out of clips -4- (2x). |
| 2 - | Bolt |
| q | Tightening torque 4 Nm |
| q | Vehicles with head airbag only |
| 3 - | Guide pins (2x) |
| 4 - | Clips (2x) |
| 5 - | Airbag label |
| q | Airbag label is permanently welded to trim -1-. |
