| –
| Lock the bracket in place with the catch -B- on the air-distributor housing |
| –
| After installing the positioning motor, check that the levers are correctly seated in the guide grooves of the positioning motor. |
Note | The operation of the positioning motor can be checked as follows, for example: Connect the contacts “4” (or“5”) and “6” in the positioning motor connector to a 12V DC source. The positioning motor moves as far as the limit stop in one direction. Interchanging positive and negative reverses the direction. Use the adapter cable for this purpose → Chapter. |
| Then reinstall all the parts removed in reverse order, paying attention to the following: |
| –
| Lay the wiring harness so that it cannot come into contact with the moving components (e.g. positioning motor lever). |
|
|
|
