audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Dismantling and assembling gearbox > < Installing gearbox

A2

Checking gearbox oil
Checking gearbox oil
Gear oil specification → Chapter
–  Remove noise insulation below engine/gearbox, if fitted.
   
–  Remove gear oil inspection plug -arrow-.
Oil level is correct when gearbox oil is up to bottom lip of filler hole.
–  Screw in plug -arrow-.
Tightening torque
  V39-1959
Oil filler plug30 Nm

Note the following when filling with new oil:
–  Remove plug -arrow-.
–  Fill up gear oil to bottom lip of filler hole.
–  Screw in plug -arrow-.
–  Start engine, engage a gear and allow gearbox to turn for approx. 2 minutes.
–  Switch off engine and remove plug -arrow-.
–  Top up gear oil again to bottom lip of filler hole.
–  Screw in plug -arrow-.
Tightening torque
   
Oil filler plug30 Nm

   

Dismantling and assembling gearbox > < Installing gearbox