audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
List of selectable display groups > < Measured value block

A2

Reading measured value block
Reading measured value block
–  Connect the vehicle diagnostic, testing and information system -VAS 5051 A- → Chapter and select the vehicle system “02 - Gearbox electronics”. Ignition must be on or the engine must be running.
   
Display on -VAS 5051 A-:
–  From list -1- select diagnostic function “08 - Read measured value block”.
  A01-0122
Display on -VAS 5051 A-:
1 - Enter display group (max. input value = 255)
–  Use keypad to enter -2- for the required “display group number” → Chapter and confirm by touching Q key.
  A01-0130
Display on -VAS 5051 A-:
1 - Display zones 1 … 4. If a display zone is vacant, nothing is displayed in this line.
2 - The selected display group is indicated here
3 - Change to a different display group by pressing these keys
4 - Change to a different function by pressing these keys (e.g. from “Read measured value block” to “Basic setting” and vice versa).
–  End diagnostic function “08 - Read measured value block” by touching ← key.
  A01-0176

List of selectable display groups > < Measured value block