audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Enginecrankshaft group, pistons > < Removing and installing engine mounting without cover for engine mounting

A2

Removing and installing pendulum support
Removing and installing pendulum support
   
Removing
–  Remove noise insulation -arrows-.
  A10-0684
–  Unscrew bolts -arrows- and remove pendulum support.
Installing
Installation is carried out in the reverse order; note the following:
  Note
Renew the bolts tightened with specified tightening angle.
  A10-0845
Tightening torques
  A10-0857
ComponentNm
Pendulum support to:Subframe -item 3-40 + 90° 1)2)
 Gearbox -item 1-50
Rear section of pendulum support to front section -item 2-40 + 90° 1)2)
l  1) Renew bolt(s).
l  2) 90° = one quarter turn.

   

Enginecrankshaft group, pistons > < Removing and installing engine mounting without cover for engine mounting