audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Exhaust turbocharger, G-charger > < Checking cooling system for leaks

A2

Removing and installing radiator fanV7
Removing and installing radiator fan -V7-
   
Removing
–  Remove bonnet → Chapter.
–  If fitted, unclip bracket -1-.
–  Take off engine cover panel -arrows-.
  A10-0812
–  Pull oil dipstick out of guide tube.
–  Remove guide tube -1- for oil dipstick.
  Note
Disregard -item 2-.
  A10-0809
–  Unplug electrical connector -3- at radiator fan control unit -J293-.
–  Unscrew bolt -2- and remove radiator fan control unit -J293-.
–  Remove securing bolt -1-.
–  Turn retaining ring in direction of -arrow- and remove radiator fan -V7- with retaining ring.
Installing
Install in reverse order.
Tightening torques
  A19-10428
ComponentNm
Retaining bolt for radiator fan -V7- to radiator cowl5
Radiator fan control unit -J293- to radiator cowl5
Engine cover panel to bracket5.5

   

Exhaust turbocharger, G-charger > < Checking cooling system for leaks