Audi Workshop Service and Repair Manuals
HOME
FEATURES
MENU
INDEX
ABOUT US
4-cylinder direct injection engine (1.6 ltr. 4-valve), mechanics >
< Checking exhaust gas recirculation
A2
Power unit
3-cylinder TDI unit injector engine (1.4 ltr. 2-valve), mechanics
Exhaust system
Exhaust gas recirculation system
Checking mechanical exhaust gas recirculation valve
Checking mechanical exhaust gas recirculation valve
Checking mechanical exhaust gas recirculation valve
Special tools and workshop equipment required
t
Hand-operated vacuum pump -VAS 6213-
Procedure
–
Remove bonnet
→ Chapter
.
–
If fitted, unclip bracket
-1-
.
–
Take off engine cover panel
-arrows-
.
–
Remove noise insulation beneath cover.
–
Remove air intake hose at intake manifold connection.
–
Disconnect vacuum hose from exhaust gas recirculation valve.
–
Connect hand-operated vacuum pump to exhaust gas recirculation valve.
–
Use hand-operated vacuum pump to generate vacuum.
l
The diaphragm rod must move in
-direction of arrow-
.
–
Pull hose of hand-operated vacuum pump off exhaust gas recirculation valve.
l
The diaphragm rod must return to normal position.
Assemble in reverse order.
Tightening torque
Component
Nm
Engine cover panel to bracket
5.5
Power unit
3-cylinder TDI unit injector engine (1.4 ltr. 2-valve), mechanics
Exhaust system
Exhaust gas recirculation system
Checking mechanical exhaust gas recirculation valve
4-cylinder direct injection engine (1.6 ltr. 4-valve), mechanics >
< Checking exhaust gas recirculation