A2
Exhaust gas recirculation system for vehicles with engine code letters AMF, BHC - exploded view |
Note
t | The exhaust gas recirculation system is activated by the engine control unit via the exhaust gas recirculation valve -N18- and the mechanical exhaust gas recirculation valve. |
t | The exhaust gas recirculation is switched off after approx. 2 minutes at idling speed. |
1 - | Gasket |
q | Renew |
2 - | Nut |
q | 22 Nm |
3 - | Bolt |
q | 22 Nm |
4 - | Intake manifold |
q | Removing and installing → Rep. Gr.23 |
5 - | Vacuum unit |
q | For intake manifold flap |
6 - | Bolt |
q | 8 Nm |
7 - | O-ring |
q | Renew |
8 - | Mechanical exhaust gas recirculation valve |
q | With intake manifold flap |
q | Checking → Chapter |
9 - | Bolt |
q | 10 Nm |
10 - | Gasket |
q | For intake manifold |
q | Renew |
q | Installation position: straight edge of gasket faces upwards |
11 - | Gasket |
q | Renew |
12 - | Bolt |
q | 22 Nm |
13 - | Connecting pipe for exhaust gas recirculation |
q | When installing, first tighten finger-tight and then tighten connections to specified torque |