audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Exhaust system > < Checking cooling system for leaks

A2

Removing and installing radiator fanV7
Removing and installing radiator fan -V7-
   
Removing
–  Detach bonnet → Chapter.
–  Pull oil dipstick out of guide tube.
–  Detach guide tube -1- for oil dipstick (press release tabs).
  Note
Disregard item -2-.
  A10-0809
–  Unplug electrical connector -3- at radiator fan control unit -J293-.
–  Remove bolt -2- and detach radiator fan control unit -J293-.
–  Remove securing bolt -1-.
–  Turn retaining ring anti-clockwise -arrow- and detach radiator fan -V7- with retaining ring.
Installing
l  Tightening torques:
  A19-10428
ComponentNm
Retaining bolt for radiator fan -V7- to radiator cowl5
Radiator fan control unit -J293- to radiator cowl5

Installation is carried out in the reverse order; note the following:
–  Install connection with guide tube for oil dipstick and oil filler pipe → Fig..
   

Exhaust system > < Checking cooling system for leaks