A2
| Fuel collector and fuel gauge sender - exploded view of components |
| 1 - | Fuel collector with flange |
| q | Removing and installing → Chapter |
| 2 - | Seal |
| q | Renew |
| q | Install dry |
| 3 - | Fuel supply pipe |
| q | Different versions are available; allocation → Parts catalogue |
| q | To fuel filter |
| q | Mark before removing |
| q | To disconnect from flange, press release tab on connection |
| q | Do not kink |
| q | Attached to connection marked “V” on flange |
| q | Clip onto fuel tank |
| 4 - | Fuel return pipe |
| q | Different versions are available; allocation → Parts catalogue |
| q | Mark before removing |
| q | To disconnect from flange, press release tab on connection |
| q | Do not kink |
| q | Attached to connection marked “R” on flange |
| q | Clip onto fuel tank |
| 5 - | Electrical connector |
| q | For fuel gauge sender -G- |
| 6 - | Union nut, 80 Nm |
| q | Remove and install with spanner for union nut -3217- |
| 7 - | Fuel gauge sender -G- |
| q | Checking resistance values → Chapter |
| q | Removing and installing → Chapter |
