A2
Fuel filter on vehicles up to 04.2002 - exploded view of components |
Note
Fitting location of fuel filter: on left side, in front of rear axle. |
1 - | 8 Nm |
2 - | Fuel filter |
q | With seal for regulating valve |
q | Flow direction is marked by arrows |
q | Do not interchange connections |
q | According to Service Schedule drain or renew → Booklet809 |
3 - | Fuel supply pipe |
q | From fuel tank |
4 - | Fuel return pipe |
q | To fuel tank |
5 - | Regulating valve |
q | Installation position: arrow points towards fuel tank |
q | When changing filter, remove retaining clip and take off regulating valve with fuel hoses still attached. |
q | Make sure O-ring in filter housing is in correct position when fitting regulating valve |
q | Temperatures below +15 °C: Passage to filter open |
q | Temperatures over +46 °C: Passage to filter closed |
6 - | Fuel return pipe |
q | From engine |
7 - | Fuel supply pipe |
q | To engine |
8 - | Retaining clip |
9 - | Bracket for fuel filter |
10 - | 10 Nm |