| –
| Release and unplug electrical connectors -1- and -2-. |
| –
| Lift retaining lugs -3- and -4- with a screwdriver and pull fuel gauge sender -G- off downwards -arrow-. |
| Installation is carried out in the reverse order; note the following: |
| –
| Insert fuel gauge sender -G- into the guide sleeves on fuel delivery unit and press upwards until it clicks into place. |
| –
| Attach connectors and check they have engaged properly. |
| –
| Install fuel delivery unit → Anchor, observing the instructions for connecting the battery. |
|
|
|
