The fluid level should be between the bottom mark -arrow A- and the top mark -arrow B- on the dipstick. |
Note! t
| Fluid must be drained off if the level is above the mark -arrow B-. |
t
| If the fluid level is below the range specified, the hydraulic system must be checked for leaks (Checking power steering system for leaks → Chapter). In this case it is not sufficient to merely top up the fluid. |
t
| Do not re-use hydraulic fluid which has been drained off. |
–
| If there are no leaks in the hydraulic system, top up hydraulic fluid. |
–
| Screw cap hand-tight onto the motor/pump unit reservoir. |
|
|
|