audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Tightening torques > < Checking camber at rear wheels

A2

Centralising toe setting at rear wheels
Centralising toe setting at rear wheels
The total toe setting at the rear wheels cannot be adjusted.
The individual toe values can be centralised by moving the rear axle.
   
–  Slacken off bolts -arrows- at mounting brackets -1-.
2 - Axle beam
–  Centralise the individual toe settings by moving the mounting brackets.
–  Install new hexagon bolts and tighten.
If the total toe setting is outside the permitted tolerance, or if it is not possible to centralise the individual settings, the axle beam must be checked for damage and renewed if necessary.
It may also be necessary to check the body dimensions/alignment at the rear axle mounting points and repair as required → Workshop manual, Body repairs.
  A44-0125

Tightening torques > < Checking camber at rear wheels