For reasons of safety, tyres should not be renewed individually, but at least on both sides of one axle. |
The tyres with the deeper tread should always be fitted on the front wheels. |
The factory recommends using tyres of the same make, design and tread pattern on all wheels. |
Always renew the rubber valve when fitting a new wheel rim or tyre. |
Tyres must be fitted with the DOT marking facing outwards (in the case of tyres with a directional tread pattern, this only applies to the left-hand side of the vehicle). |
If the vehicle is fitted with tyres with a directional tread pattern, the spare wheel should have a wheel/tyre combination for the right-hand side of the vehicle. |
Always clean contact surfaces between rims and brake disc. |
|
|
|