–
| Position wheel on wheel hub and secure by hand with two opposing wheel bolts. |
–
| Screw in remaining wheel bolts by hand. They should screw in easily. Make sure the bores are exactly centralised. |
–
| If necessary lift the wheel slightly and tighten two wheel bolts lightly by hand. |
–
| When fitting the wheel, screw in all wheel bolts evenly by hand. |
–
| Tighten wheel bolts in diagonal sequence to approx. 50 Nm using wheel brace or similar. |
–
| Lower vehicle to floor and tighten wheel bolts in diagonal sequence to final torque. |
t
| Tightening torque: 120 Nm |
|
|
|