audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Selecting functions > < Connecting fault reader V.A.G 1551 and selecting address word

A2

Running gear self-diagnosis for ESP, steering
Self-diagnosis
Erasing fault memory, end of output

Requirements:

  • ● Fault memory interrogated

1. Erasing fault memory

  • ‒ Press ⇒ key.
 
→ Indicated on display:
(function selection enable)
Rapid data transfer    HELP
Select function XX
  • ‒ Press keys 0 and 5 to enter "Erasing fault memory" function.
 
→ Indicated on display:
Rapid data transfer    Q
05 - Erasing fault memory

- Confirm entry with Q key.
 
→ Indicated on display:
Rapid data transfer     ⇒
Fault memory erased
  • ‒ Press ⇒ key.
 
→ Indicated on display:
(function selection enable)
Rapid data transfer    HELP
Select function XX

Notes:
 
→ This display indicates that test sequence has not been implemented correctly.
Attention:
Fault memory not interrogated
  • ◆ Keep exactly to test sequence:
    Interrogate fault memory first and then erase it

    • 2. End of output

    • ‒ Press keys 0 and 6 to end output.
     
    → Indicated on display:
    Rapid data transfer    Q
    06 - End of output
    • ‒ Confirm entry with Q key.
     
    → Indicated on display:
    Rapid data transfer     HELP
    Enter address word XX
    • ‒ Switch off ignition
    • ‒ Unplug connector to fault reader V.A.G 1551.
    • ‒ Switch on ignition.

    ABS warning lamp -K47 must go out after approx. 2 seconds.

    Selecting functions > < Connecting fault reader V.A.G 1551 and selecting address word