audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Replacing bulb for front interior light > < Removing and installing light for vanity mirror

A2

Removing and installing front interior/reading light
Removing and installing front interior/reading light
Special tools and workshop equipment required
   
t  Disassembly tool -3409-
  W00-0016
Removing
–  Switch off ignition and remove ignition key.
–  Switch off front interior lights and reading lights.
–  Unclip lens from interior light/reading light using disassembly tool -3409--arrow-.
  A96-10022
–  Release the retainer tabs -arrows- with the disassembly tool -3409- and take the interior light/reading light out of the roof opening.
  A96-10023
–  Unplug electrical connectors -1 ... 3-.
Installing
Install in reverse order, paying attention to the following:
–  Insert lens for interior light/reading light and press on until it engages.
–  Press on lens for interior light until it engages.
  A96-10024

Replacing bulb for front interior light > < Removing and installing light for vanity mirror