audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Removing and installing sun roof switch E8 > < Removing and installing tank filler flap remote release switch E204

A2

Removing and installing interior monitoring deactivation switchE183
Removing and installing interior monitoring deactivation switch -E183-
Removing
–  Switch off ignition and remove ignition key.
–  Remove the lower B-pillar trim on the driver's side → Rep. Gr.70.
   
–  Carefully release retaining clips -1- using a small screwdriver.
–  Press the interior monitoring deactivation switch -E183--Item 2- to the rear out of the lower B-pillar trim.
  Note
-Item 3- and -Item 4- can be ignored.
Installing
Install in reverse order, paying attention to the following:
–  Fit the lower B-pillar trim on the driver's side → Rep. Gr.70.
  A96-0747

Removing and installing sun roof switch E8 > < Removing and installing tank filler flap remote release switch E204