audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Removing and installing switch unit with window lifter switches E40 , E39 , E41 , E53 and E55 > < Removing and installing function selection switch 2 E272

A2

Removing and installing mirror adjustment switchE43
Removing and installing mirror adjustment switch -E43-
Removing
–  Switch off ignition and remove ignition key.
–  Remove the front door trim → Rep. Gr.70.
–  Detach insulating mat from door trim.
   
–  Screw out bolts -arrows-.
–  Detach switch mount -1- from armrest.
–  Unplug electrical connector.
  A96-0392
–  Use small screwdriver to carefully release fasteners -arrows-.
–  Pull the mirror adjustment switch -E43--Item 1- downwards out of the switch mount.
Installing
Install in reverse order, paying attention to the following:
  Note
On installation, ensure that symbol panel is inserted in front of mirror adjustment switch.
–  Press the mirror adjustment switch -E43- into the switch mount until the fasteners engage.
–  Install the front door trim → Rep. Gr.70.
  A96-0744

Removing and installing switch unit with window lifter switches E40 , E39 , E41 , E53 and E55 > < Removing and installing function selection switch 2 E272