audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Removing and installing hazard warning switch E3 > < Removing and installing light switch E1

A2

Removing and installing switches and instruments illumination regulatorE20/headlight range control regulatorE102
Removing and installing switches and instruments illumination regulator -E20-/headlight range control regulator -E102-
The switches and instruments illumination regulator -E20- and the headlight range control regulator -E102- are located in a joint housing. These components are not available separately; for assignment see →  Parts List.
   
Removing
–  Remove light switch → Chapter.
–  Release the 4 clips -arrows-.
–  Take the switches and instruments illumination regulator -E20-/headlight range control regulator -E102--Item 1- out of the housing -2-.
Installing
Install in reverse order, paying attention to the following:
–  Press the switches and instruments illumination regulator -E20-/headlight range control regulator -E102- into the switch housing until it is heard to engage.
–  Install the light switch → Chapter.
  A96-0200

Removing and installing hazard warning switch E3 > < Removing and installing light switch E1