audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Number plate light > < High-level brake light

A2

Removing and installing high-level brake light
Removing and installing high-level brake light
   
Removing
–  Do not press brake pedal.
–  Remove the lower rear lid trim → Rep. Gr.70.
–  Unplug the connector -3-.
–  Remove bolts -2-.
–  Pull high-level brake light -1- upwards out of guides -arrows-.
Installing
Install in reverse order, paying attention to the following:
  Note
The entire high-level brake light must be replaced in the event of defective LEDs.
–  Fit the lower rear lid trim → Rep. Gr.70.
Tightening torque
  A94-0248
ComponentNm
High-level brake light to tailgate2.3

   

Number plate light > < High-level brake light