audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Steering column switch > < Number plate light

A2

Removing and installing number plate light
Removing and installing number plate light
   
Removing
–  Turn light switch to “0” position.
–  Remove bolts -arrows-.
–  Remove bulb carrier from tailgate.
–  Detach electrical connector.
  A94-0434
–  Press the release buttons -1- and -2- and detach the bulb holder from the number plate light bulb carrier -arrow-.
–  Pull the bulb (12 V, 5 W) out of the clamp-type holder.
Installing
Install in reverse order, paying attention to the following:
–  Insert the bulb in the clamp-type holder.
–  Slide the bulb holder onto the number plate light bulb carrier.
Tightening torque
  A94-0433
ComponentNm
Number plate light to tailgate1.2

   

Steering column switch > < Number plate light