| –
| Remove the steering column switch → Chapter. |
| –
| Remove the coil connector with slip ring and steering angle sender -G85- → Chapter. |
| –
| Release retaining spring -arrow- and detach lever switch -Item 2- for windscreen wipe/wash, FIS from lever switch -Item 1- for turn signal/lights, CCS. |
| Install in reverse order, paying attention to the following: |
| –
| Make sure all catches and the connectors are properly engaged. |
| –
| Fit the coil connector with slip ring and steering angle sender -G85- → Chapter. |
| –
| Fit the steering column switch → Anchor. |
|
|
|
