Determining location of fault |
Special tools and workshop equipment required |
t
| Vehicle diagnostic tester |
The precise location of the fault is very difficult to find. A damaged fibre optic cable must be renewed by fitting a new cable parallel to the defective one. |
Note t
| You can use the menu options in the vehicle diagnostic tester functions „Guided Fault Finding“ or „Guided Functions“ to find out where (between which components) the fibre optic cabling is damaged. |
t
| A fibre optic cable that has already been repaired is coloured „yellow“. |
–
| Connect vehicle diagnostic tester and switch on ignition. |
–
| Select the following menu options: |
t
| Guided Functions or Guided Fault Finding |
t
| Selecting function/component |
t
| 01 - Self-diagnosis compatible systems |
–
| Remove components concerned. |
–
| Disconnect connectors from components. |
–
| Prepare fibre optic cable: |
|
|
|