A2
Immobilizer self-diagnosis - immobilizer III
Erasing fault memory
Note: If fault memory cannot be erased, interrogate fault memory again and eliminate fault. Requirements:
After fault memory interrogation: |
→ Indicated on display: |
|
||
|
→ Indicated on display: |
|
||
|
→ Indicated on display: |
|
||
Fault memory has now been erased.
|
→ Indicated on display: |
|
||
Notes: |
→ Test sequence has not been correctly implemented if adjacent display appears. |
|
||
|
→ Test sequence has not been correctly implemented if adjacent display appears. |
|
||
Keep exactly to test sequence: Interrogate fault memory first, eliminate any faults and then erase fault memory. After erasing fault memory, faults are not updated until ignition has been switched off and on again. |