audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Removing and installing navigation aerial (GPS) R50 > < Removing and installing TV aerial amplifiers

A2

Removing and installing navigation interfaceR94
Removing and installing navigation interface -R94-
–  Switch off all electrical equipment.
–  Remove ignition key.
Removing:
–  Remove lower right A-pillar trim → General body repairs, interior; Rep. Gr.70.
   
–  Unplug connectors -4- at interface -1-.
–  Unscrew nut -2- (5 Nm) and swivel interface -1- to left together with holder -3-.
–  Pull interface -1- in direction of connector -4- out of holder -3-.
Installing:
  A91-0682
–  On installation, make sure lug -1- is properly engaged in hole -arrow-.
–  Then position retainer -3- on stud -2-.
–  Install accordingly in reverse order of removal.
  A91-0775

Removing and installing navigation aerial (GPS) R50 > < Removing and installing TV aerial amplifiers